Mainboards, BIOS, Prozessoren, RAM 27.301 Themen, 124.199 Beiträge

Probleme mit ABIT KT7/A RAID mainboard

ZYON / 1 Antworten / Baumansicht Nickles

hallo
ich habe ein prob. mit meinem MB. ABIT KT7/A RAID .
1. es erkennt nur hin und wieder mal die cd-rom laufwerke . also mal findet er sie , dann wieder nicht . habe schon cd-rom laufwerke (brenner & CD-ROM laufwerke ) gegen neuere modelle ausgetauscht .
2. ich bekomme um verrecken nicht den dma - modus für die cd-rom laufwerke rein . mein cd laufwerke nr.1 war Sony 40 * AKU , (in meinem 2.ten rechner , läuft dieser cd-rom laufwerk im DMA 33 modus )
aber auf meinem 400 .- DEM sauteuren mainboard läuft es nur in PIO 4 modus . dann habe ich mir ein neues gekauft
LG 8521 52 Fach speed , und dies läuft auch nur im PIO 4 modus . das schlimme ist daran , wenn ich unter windows 98 oder 2000 eine musikcd laufen lasse , kann ich mit dem rechner nicht mehr arbeiten . alle CPU Leistung gehen für die
cd rom laufwerke drauf. die härte ist die , das ich im BIOS versucht habe , den DMA modus einzustellen . leider gibt er nur die optionen " AUTO oder DISABELD " schönes mainboard was ich mir da gekauft habe . ich habe auch versucht mich mit ABIT auseinander zusetzen , leider reagieren die überhaupt nicht auf meine hilfe mails. und wenn ich versuche anzurufen , nätürlich muß ich im ausland telefonieren . komme ich nur in so einer warteschleife . ich wollte auch dieses mainboard wieder umtauschen , leider gibt es diesen PC - händler nicht mehr er hat pleite gemacht .
und jetzt stehe ich dumm da . bitte helft mir , ich weiß nicht mehr weiter . ich stehe kurz davor AMOK zu laufen .
die konfiguartion meines rechners . (ich weiß nicht ob es wichtig ist ?)
ABIT KT7/A RAID MB. (ich dachte wenn ich mir für 400 steine ein mainboard kaufen tue , das ich dann Qualität erwarten könnte . pustekuchen )
256 MB RAM Hitatchi PC133 MHz 2*128 MB
CPU AMD DURON 900 MHz
2 *20 GB festplatten Maxtor laufen nicht auf dem RAID kontroller RAID DEAKTIVIERT Festplatten laufen auf U/DMA 100
TNT 2 grafikkarte 32 MB RAM (ich weiß ist alt , aber ich bin zufrieden . ich habe sie mir nur für 100 steine gekauft , auch ich muß auf das geld schauen )
eine TV - Karte von annubis mit radio
eine netzwerkkarte 10/100 MBit 3 COM PCI
Soundblaster AWE 64 Gold ISA
CD ROM LG 8521 52 fach
brenner Yamaha CDRW 4261
win 98 und 2000 ( beides schon gepacht wie blöd )
danke für eure hilfe im voraus

bei Antwort benachrichtigen
Carlitos ZYON „Probleme mit ABIT KT7/A RAID mainboard“
Optionen

Hallo zyon,

da ich nicht weiß, was Du schon alles ausprobiert oder gepatcht hast, hilft Dir vielleicht dieser Auszug aus der inoffiziellen KT7-FAQ weiter:

Why can't I enable DMA on my CDROM?

For users of the Kenwood TrueX 72x CDROM driver, note that Kenwood provide a firmware patch to resolve this issue here. For the Kenwood TrueX 62x see here.

Some CDROM drives also require a jumper to be set on the drive itself to enable DMA support. Make sure you have done this first!!

When you install the VIA 4in1 driver make sure the box marked "Enable DMA support" is ticked for the "vendor ATAPI support" driver. If you are unsure whether you did this, reinstall the 4in1 drivers. (Note, one user reports that if this is enabled, then his Kenwood CDROM cannot read CDR or CDRW disks - be warned!)

It has been reported that the VIA 4in1 drivers version 4.29 beta and later resolve DMA issues under Windows 2000.

Under most versions of Windows, you must set the Master (or Slave) Drive Ultra DMA mode to Auto. However, under Windows 2000 you may need to set the Master (or Slave) Drive Ultra DMA setting to Disable under the IDE Controller in order for Windows 2000 to be able to enable DMA (see ABIT FAE advice). This also holds true for some CDROM devices under Windows 98 (eg. Kenwood) - you may need to experiment with this setting.

If this doesn't help it seems that if IRQ resources are reallocated by the Windows PnP system then the DMA setting can be lost. There are two solutions possible solutions:

Change the PCI/PnP settings in the BIOS so that there is no need for Windows to reallocate resources. For example, if a sound card has a Legacy Sound component that wants to go at IRQ 5, set "PnP OS" to "No" and set IRQ 5 to "Legacy ISA". This way, Windows won't try to juggle everything out of the way (because it is already done by the BIOS).
A second solution is described in Microsoft Knowledge Base article Q235859, "DMA CD-ROM Drive Icon Does Not Appear in Windows Explorer". Basically, this says to go into the Device Manager and go to the parent IDE controller. Go to the Resources tab, clear the "Use Automatic Settings" checkbox, and change the I/O range to something different. It does not seem to matter what it is changed to, so long as it does not conflict with anything else.
Other solutions

Another user managed to enable DMA on his Plextor CDRW drive by changing to the Intel standard bus master driver (instead of the VIA driver). To do this in Device Manager, select your Hard Disk controller, then the Driver tab, then the Update Driver button. Select a list of All drivers, then Standard hard disk drivers, then Standard Bus Mastering IDE hard disk controller or the Standard Dual PCI EIDE Controller.

Another user enabled DMA on his CDROM by selecting "Cable Select" on the CDROM using a jumper on the unit, and disabling COM1 and COM2 causing IRQ resources to be reallocated.

Try disabling SB16 emulation if you are using a Soundblaster sound card (see sound section).

Another user found the following steps to work:

1. Delete CDROM from Device Manager
2. Set BIOS to none for the IDE CDROM channel - the BIOS will not detect the CDROM (no problem, Windows does)
3. Enable DMA after reboot
4. Windows asks for reboot again
5. DMA is enabled

bei Antwort benachrichtigen