› › ›

Linux 14.980 Themen, 106.331 Beiträge

Verfolgung starten Optionen

Netzwerk dringend hife benötigt ..

Logo (Anonym) / 7 Antworten / Flachansicht Nickles

hallo !!

Ich versuche zur Zeit meine Netzwerkkarte zu konfigurieren ich habe eine NE 2000 PCI 100Mbit.
Ich habe natürlich als erstes .. über Yast .. die Netzwerkkarte installiert ..

und zwar .. bei

Typ des Netzwerk: eth0
Art der Netzwerkkarte: NE 2000 PCI
Otionen zum Laden des Moduls:
options ne io=0x300 irq=12

Nach der Einstellungen habe ich versucht das Netzwerk zu starten ..mit:

insmod ne io=0x300 irq=12

darauf bekam ich folgendes auf den Bildschirm ..

lib/modules/2.2.13/net/ne.o:unresolved symbol ei_open
lib/modules/2.2.13/net/ne.o:unresolved symbol ethdev_init
lib/modules/2.2.13/net/ne.o:unresolved symbol ei_interrupt
lib/modules/2.2.13/net/ne.o:unresolved symbol NS8390_init
lib/modules/2.2.13/net/ne.o:unresolved symbol ei_close

das war mir klar..dass es nicht problemlos laufen würde ..

dann hab ich mit den Befehl " cat /proc/pci " um den pci bus zu scannen

überraschended sah ich folgendes..:

...
Ethernet controller : Realtek 8139 (rev 16.)
Medium devsel. Fast back-to-back capable. IRQ 12
Master capable. Latency=32. Min Gnt=32. Max lat=64 I/O at 0xd000 [0xd001].
Non-prefetchable 32 bit memory at 0xde800000 [0xde800000]

So jetzt meine Frage ..

soll ich im "Yast" unter Art der Netzwerkkarte NE2000 PCI oder Realtek RTL8129/8139 einstellen ?

unter conf.modules ist folgendes eintragen ..

options ne2k-pci option ne io=0300 irq=12

ist meine io base adresse richtig ??

also ich würde mich fruen wenn mir jemand sagen könnte was bei mir falsch ist ..
und wie die Fehlern beheben kann .

wie kann ich eigentlich schnell feststellen ob dasd netzwerk tut ??


vielen Dank


Logo

bei Antwort benachrichtigen
Hi,unter SuSE habe ich bislang alle Netzwerkkarten ohne optionen in den ... AxelE
Ich habe nur eine 10Mbit Ne2000 Pci karte, die wird ohne Optionen ... samson
hallo ...sehr interesant .. hast du es über yast installiert .. und dann ... logo
kurz: ja.lang: die Einträge in der modules.conf werden auch von yast ... AxelE
logo AxelE „kurz: ja.lang: die Einträge in der modules.conf werden auch von yast generiert...“
Optionen

Hallo !!!

Nun,AxelE ich habe als erstes die Datei "modules.conf" editiert .. und folgendes ist drin:

alias ne2k-pci

dann hab ich die Datei "c.config" editiert und so sieht sie aus ..:

# networking
# number of network cards: "_0" for one, "_0 _1 _2 _3" for four cards
#
NETCONFIG="_0"
#
# IP Adresses
IPADDR_0="192.168.0.99"
IPADDR_1=""
IPADDR_2=""
IPADDR_3=""
# network device names (e.g. "eth0")
#
NETDEV_0="eth0"
NETDEV_1=""
NETDEV_2=""
NETDEV_3=""
#
# parameteres for ifconfig, simply enter "bootp" or "dhcpclient" to use the
# respective service for configuration
# sample entry for ethernet:
# IFCONFIG_0="192.168.81.38 broadcast 192.168.81.63 netmask 255.255.255.224"
#
IFCONFIG_0="192.168.0.99 broadcast 192.168.0.255 netmask 255.255.255.0 up"


Die Netzwerk installation über Yast ist kein problem ..ich hab es auch über Yast
installieren wollen,hat aber wie erläutert nicht funktioniert ..

ich habe auch schon folgendes versucht .. und zwar hab ich


IFCONFIG_0="192.168.0.99 broadcast 192.168.0.255 netmask 255.255.255.0 up"

durch diese ersetzt

IFCONFIG_0="192.168.0.99 broadcast netmask"

und wieder gebootet die Fehlermeldungen ..hat sich verringert ..läuft trotzdem nicht

ich komme grad nicht weiter ..

ich sollte dir die dateien .. /var/log/messages und die /var/log/warn posten falls
nix tut ..


also hier sind sie ..:


/var/log/messages

Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c: No useable cards found, driver NOT installed.
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c: No useable cards found, driver NOT installed.
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c: No useable cards found, driver NOT installed.
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c: No useable cards found, driver NOT installed.
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c: No useable cards found, driver NOT installed.
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Apr 1 16:39:22 P2-400 kernel: ne2k-pci.c: No useable cards found, driver NOT installed.


/var/log/warn

Apr 7 14:04:16 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:04:16 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:04:16 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:04:16 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:04:16 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:04:16 P2-400 kernel: unable to read partition table
Apr 7 14:04:16 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:04:16 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:04:16 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:04:16 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:04:16 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:04:16 P2-400 kernel: unable to read partition table
Apr 7 14:36:04 P2-400 lpd[202]: /var/spool/lpd/Deskjet-500//log: No such file or directory
Apr 7 14:37:49 P2-400 kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Apr 7 14:37:50 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:37:51 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:37:51 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:37:51 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:37:51 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:37:51 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:37:51 P2-400 kernel: unable to read partition table
Apr 7 14:37:51 P2-400 insmod: /lib/modules/2.2.13/scsi/ncr53c8xx.o: init_module: Device or resource busy
Apr 7 14:37:52 P2-400 kernel: ncr53c8xx: IO region 0xb800 to 0xb87f is in use
Apr 7 14:37:52 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:37:54 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:37:54 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:37:54 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:37:54 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:37:54 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:37:54 P2-400 kernel: unable to read partition table
Apr 7 14:38:14 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:38:15 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:38:15 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:38:15 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:38:15 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:38:15 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:38:15 P2-400 kernel: unable to read partition table
Apr 7 14:38:33 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:38:34 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:38:34 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:38:34 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:38:34 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:38:34 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:38:34 P2-400 kernel: unable to read partition table
Apr 7 14:38:53 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:38:54 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:38:54 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:38:54 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:38:54 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:38:54 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:38:54 P2-400 kernel: unable to read partition table
Apr 7 14:40:03 P2-400 kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Apr 7 14:40:04 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:40:04 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:05 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:06 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:40:06 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:40:06 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:40:06 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:40:06 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:40:06 P2-400 kernel: unable to read partition table
Apr 7 14:40:06 P2-400 insmod: /lib/modules/2.2.13/scsi/ncr53c8xx.o: init_module: Device or resource busy
Apr 7 14:40:07 P2-400 kernel: ncr53c8xx: IO region 0xb800 to 0xb87f is in use
Apr 7 14:40:07 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:40:07 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:07 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:08 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:40:08 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:40:08 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:40:08 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:40:08 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:40:08 P2-400 kernel: unable to read partition table
Apr 7 14:40:28 P2-400 kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Apr 7 14:40:29 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:40:29 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:29 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:31 P2-400 insmod: /lib/modules/2.2.13/scsi/ncr53c8xx.o: init_module: Device or resource busy
Apr 7 14:40:31 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:40:31 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:40:31 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:40:31 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:40:31 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:40:31 P2-400 kernel: unable to read partition table
Apr 7 14:40:31 P2-400 kernel: ncr53c8xx: IO region 0xb800 to 0xb87f is in use
Apr 7 14:40:31 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:40:31 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:32 P2-400 last message repeated 4 times
Apr 7 14:40:33 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:40:33 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:40:33 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:40:33 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:40:33 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:40:33 P2-400 kernel: unable to read partition table
Apr 7 14:40:50 P2-400 kernel: end_request: I/O error, dev 02:00 (floppy), sector 0
Apr 7 14:40:51 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:40:51 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:51 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:52 P2-400 insmod: /lib/modules/2.2.13/scsi/ncr53c8xx.o: init_module: Device or resource busy
Apr 7 14:40:53 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:40:53 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:40:53 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:40:53 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:40:53 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:40:53 P2-400 kernel: unable to read partition table
Apr 7 14:40:53 P2-400 kernel: ncr53c8xx: IO region 0xb800 to 0xb87f is in use
Apr 7 14:40:53 P2-400 kernel: sym53c810a-0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
Apr 7 14:40:53 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:54 P2-400 /usr/sbin/gpm[181]: Error in protocol
Apr 7 14:40:55 P2-400 kernel: sda : READ CAPACITY failed.
Apr 7 14:40:55 P2-400 kernel: sda : status = 1, message = 00, host = 0, driver = 28
Apr 7 14:40:55 P2-400 kernel: sda : extended sense code = 2
Apr 7 14:40:55 P2-400 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.
Apr 7 14:40:55 P2-400 kernel: sda:scsidisk I/O error: dev 08:00, sector 0
Apr 7 14:40:55 P2-400 kernel: unable to read partition table
Apr 7 15:47:38 P2-400 lpd[202]: /var/spool/lpd/Deskjet-500//log: No such file or directory
Apr 7 16:02:07 P2-400 lpd[198]: /var/spool/lpd/Deskjet-500//log: No such file or directory
Apr 7 16:20:26 P2-400 lpd[198]: /var/spool/lpd/Deskjet-500//log: No such file or directory
Apr 7 17:43:27 P2-400 lpd[198]: /var/spool/lpd/Deskjet-500//log: No such file or directory

hui ist einwenig zu lang geworden ..

die datei ist zu gross ,,kqann sie dir per mail schicken ..wenn es dir das was icvh dir gebe nicht reicht ..

naja ich hoffe dass du mir helfen kannst .. AxelE oder irgendjemand .. bin froh für jede hilfe ..


danke ..


Logo

bei Antwort benachrichtigen
Hi Logo,ich bin mir nicht ganz sicher, ob du nur ein Netzwerkprolem hast. Du ... AxelE
hi Axel vielen Dank für deine Hilfbereitschaft ..ich habe ein scsi System ... Logo (Anonym)