Ich habe ein Problem mit meiner Festplatte. Und zwar zeigt Partition Magic mir Fehler #108 an, d.h. ich kann auf meine bestehenden Datne(ca. 15 -20 GB9 nicht mehr zugreifen. Kann mir bitte irgendjemand helfen dieses Problem zu lösen? Ich wäre Ihnen/Euch sehr dankbar. Vielen Dank
Lord_Sidious1 (Anonym) „Hallo L_S, hatte das gleiche Problem auch mal - nach einem Tag schwitzen hab ich...“
Hallo,
vielen Dank für den Tip ;-) Ich habe mich genau an Deine Anweisungen gehalten, allerdings zeigt er mir die Fehler nach wie vor an, obwohl die Fehler eigentlich korrigiert sein müssten. Da ich mich mit diesen Tabellen nicht so sehr auskenne stelle ich hier mal die PartitionInfo Datei rein, vielleicht erkennst Du ja was ich falsch gemacht habe:
===========================================================================================================
Disk Geometry Information for Disk 1: 1115 Cylinders, 255 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
===========================================================================================================
0 0 80 0 1 1 0C 1023 254 63 63 17,912,412
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 80 0 1 1 0C 1114 254 63 63 17912412
===========================================================================================================
Disk Geometry Information for Disk 2: 3737 Cylinders, 255 Heads, 63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head Sect StartSect NumSects
===========================================================================================================
0 0 00 0 1 1 0F 1023 254 63 1,008 31,408,335
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 00 0 16 1 0F 1955 35 63 1008 31408335
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 16.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 35.
0 1 00 1023 1 1 0C 1023 254 63 31,409,343 28,625,562
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 1 00 1955 36 1 0C 3736 254 63 31409343 28625562
Error #105: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 36.
1,008 0 80 1 1 1 0B 638 254 63 16,128 10,241,217
Error #110: Number of sectors in partition is inconsistent.
ucSectors = 10241217
end - begin = 10249407
1,008 1 00 637 1 1 05 1023 254 63 10,242,288 10,304,847
Info: End C,H,S values were large drive placeholders.
Actual values are:
1008 1 00 637 1 1 05 1278 254 63 10242288 10304847
Error #116: Starting sector of partition is inconsistent.
ulStartSect = 10242288
Begin C,H,S = 10233468
Warning #110: Number of sectors in partition is inconsistent.
ucSectors = 10304847
end - begin = 10313667
10,242,288 0 80 1023 1 1 0B 1023 254 63 16,434,558 4,097,457
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
10242288 0 80 1023 1 1 0B 1278 14 63 16434558 4097457
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 14.
10,242,288 1 00 892 1 1 05 1023 254 63 14,339,808 6,192,207
Info: End C,H,S values were large drive placeholders.
Actual values are:
10242288 1 00 892 1 1 05 1278 14 63 14339808 6192207
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 14.
Error #116: Starting sector of partition is inconsistent.
ulStartSect = 14339808
Begin C,H,S = 14330043
Warning #110: Number of sectors in partition is inconsistent.
ucSectors = 6192207
end - begin = 6201972
14,339,808 0 80 1023 1 1 0B 1023 254 63 16,434,558 30,721,761
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
14339808 0 80 1023 1 1 0B 2935 87 63 16434558 30721761
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 87.
14,339,808 1 00 1023 1 1 05 1023 254 63 45,061,6324,281,315,007
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
14339808 1 00 2804 244 1 05 1955 35 63 450616324281315007
Info: Partition didn't begin on head boundary.
ucBeginHead expected to be 0 or 1, not 244.
Info: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 35.
45,061,632 0 80 1023 1 1 0B 1023 254 63 16,434,558 14,974,785
Info: Begin C,H,S values were large drive placeholders.
Info: End C,H,S values were large drive placeholders.
Actual values are:
45061632 0 80 1023 1 1 0B 1955 35 63 16434558 14974785
Error #108: Partition didn't end on cylinder boundary.
ucEndHead expected to be 254, not 35.
Error #120: Logical Drive chain extends toward start of drive.
===========================================================================================================
Partition Information for Disk 1: 8,746.3 Megabytes
Volume PartType Status Size MB PartSect # StartSect TotalSects UsedSects FreeSects
===========================================================================================================
C: FAT32X Pri,Boot 8,746.3 0 0 63 17,912,412 17,912,412 0
===========================================================================================================
Partition Information for Disk 2: 29,313.9 Megabytes
Volume PartType Status Size MB PartSect # StartSect TotalSects UsedSects FreeSects
===========================================================================================================
ExtendedX Pri 15,336.1 0 0 1,008 31,408,335 27,327,825 4,080,510
EPBR Log 5,007.10 None -- 1,008 10,256,337 10,256,337 0
FAT32 Log,Boot 5,000.6 1,008 0 16,128 10,241,217 0 10,241,217
EPBR Log 5,031.7 1,008 1 10,242,288 10,304,847 10,304,847 0
Free Space Log 1,992.4 None -- 10,249,470 4,080,510 0 4,080,510
EPBR Log 3,023.5 10,242,288 1 14,339,808 6,192,207 6,192,207 0
FAT32 Log,Boot 2,000.7 10,242,288 0 16,434,558 4,097,457 0 4,097,457
FAT32 Log,Boot 15,000.9 14,339,808 0 16,434,558 30,721,761 0 30,721,761
FAT32 Log,Boot 7,311.9 45,061,632 0 16,434,558 14,974,785 0 14,974,785
FAT32X Pri 13,977.3 0 1 31,409,343 28,625,562 0 28,625,562
EPBR Log 2,090,485.8 14,339,808 1 45,061,6324,281,315,0074,281,315,007 0
Ich hoffe, dass es in diesem Format auch noch einigermaßen lesbar ist.
Im Voraus besten Dank,
Sid
