Laptops, Tablets, Convertibles 11.829 Themen, 56.657 Beiträge

Verfolgung starten Optionen

HELP OVERDOSE 3 or CLEVO 2200C: BLUE SCREENS!!

lucQ / 16 Antworten / Flachansicht Nickles

Hello,


 Since I have upgraded Windows Millenium to Windows XP Pro on my Gericom Overdose 3 996 Mhz, L2 256, I got regularly a blue screen and then the laptop falls out This happens when I start up, but also just when I (think I) am working fine.


 The logbookitem says:  "AMLI: ACPI BIOS probeert op het ongeldige I/O-poortadres 0x71 te lezen, dat in het beschermde 0x70 - 0x71-adresbereik ligt. Dit leidt mogelijk tot een instabiel systeem. Neem voor technische ondersteuning contact op met de leverancier van het systeem. "


DO I NEED TO UPGRADE THE BIOS??


HOW CAN I DO SO?


On the Clevo website, I have located and downloaded several update drivers  but I don't know if these are the Bios upgrade and if I install them properly just bij running the exefiles.


I heard somewhere that I should install these updated drivers before I install XP , but how, or when then? Should I change to NTFS volumes instead of FAT32?  


Who can help me out?


 

bei Antwort benachrichtigen
Alpha13 lucQ „HELP OVERDOSE 3 or CLEVO 2200C: BLUE SCREENS!!“
Optionen

Take this bios file (110C) before installing XP and this drivers after installing XP:
ftp://ftp.gericom.com/Notebook/2xC/Bios/
ftp://ftp.gericom.com/Notebook/2xC/winXP/

1.Download BIOS Update files.
2.Prepare a bootable diskette and copy BIOS refresh tool programs (flash.exe and fp.exe)
and BIOS file (22cr110.bin) to the diskette.
3.Insert the diskette into machine then boot up machine via floppy, type fp BIOS_file_name.bin
to start BIOS refresh process.
4.When all process are finished please reboot machine and enter BIOS setup, press "Exit"
item and restore the default settings, then choose "Save and Exit" to save all setting changes.

As bootable diskette I can recommend DrDOS 7.x Disk For BIOS Flashing Basic - No Drivers:

http://www.bootdisk.com

bei Antwort benachrichtigen
At the DOS Prompt you have to type fp 22cr110.bin enter . Alpha13
Direct after flashing you have to go into the BIOS and load and save the ... Alpha13
Thank you very much, I will try this, but do I understand this right: 1.I ... lucQ
Hello Alpha13 I tried to flash the BIOS as described by you. As I could not ... lucQ
If you got the message that You could turn the computer off, the Bios has ... Alpha13
To boot via floppy, You have to change the Bootsequenz in the Bios to floppy! Alpha13
Hooray, Thank you, Alpha13, I flashed again with your advice : Type fp /n ... lucQ
Here I am again : The original problem is still there: Suddenly, I get a ... lucQ
Install XP new. Alpha13
First You have to kill all Partitions with S0KILL under DOS: ... Alpha13
Type fp /n Gericom 22cr110.bin ENTER at the DOS-Prompt. Alpha13
Okay, I will do so next next week, time to get my family updated first : lucQ
Hi, I ve experienced similar problems with the clevo2200c. Installing the ... tomdr
You are right that installing the latest bios didnot help. For the moment I ... lucQ
Try this BIOS Version 1.11: http://www.fosa.com/TechSupport/FOSATech.html It ... Alpha13