Fehlermeldung siehe hier:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17.07.2002 09:20:56
ahead WinASPI: File 'E:\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22.07.2004 17:33:44
Nero Version: 6.3.1.20
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.16 - HA 1 TA 1 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2510A >Version: 2.16 - HA 1 TA 1 - 6.3.1.20
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 1 ID 1 DMA: Off
DiskPeripheral : IC35L120AVV207-0 nvatabus Port 3 ID 0 DMA: Off
DiskPeripheral : ST3120026A nvatabus Port 3 ID 1 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-530A nvatabus Port 3 ID 0 DMA: Off
DiskPeripheral : WDC WD800BB-00CAA1 nvatabus Port 3 ID 1 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2510A X: CDRom0
SONY DVD RW DRU-530A W: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 88MB (90848kB)
Memory in use : 88 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.9.2004
CueSheet
14:54:13 #1 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated
14:54:14 #2 Text 0 File Reader.cpp, Line 126
Reader running
14:54:14 #3 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-2510A running
14:54:14 #4 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-at-Once, using CD-R/RW media
14:54:14 #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 358542 ( 79:42.42)
14:54:14 #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)
14:54:14 #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: _NEC DVD_RW ND-2510A;
CDR code: 00 97 15 05; OSJ entry from: TDK Corporation
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
14:54:14 #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:54:14 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 300 (300) = #300/0:4.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE2, 2448, config 0x4, wanted index0 0 blocks, length 300 blocks [_NEC DVD_RW ND-2510A ]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
11 indices, index0 (150) provided
original disc pos #0 + 47667 + 18631 + 17999 + 63470 + 28686 + 44569 + 52078 + 46433 + 34445 + 4115 (358093) = #358093/79:34.43
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_ULTRARAW96_MODE2, 2448, config 0x4, wanted index0 0 blocks, length 358093 blocks [_NEC DVD_RW ND-2510A ]
--------------------------------------------------------------
14:54:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-2510A ] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 0 367200 1101600, ISRC ""
2: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 1101600 1468800 878080464, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x61
0 | 1 | 1 | 0x00 | 0x61
300 | 2 | 0 | 0x00 | 0x61
450 | 2 | 1 | 0x00 | 0x61
48117 | 2 | 2 | 0x00 | 0x61
66748 | 2 | 3 | 0x00 | 0x61
84747 | 2 | 4 | 0x00 | 0x61
148217 | 2 | 5 | 0x00 | 0x61
176903 | 2 | 6 | 0x00 | 0x61
221472 | 2 | 7 | 0x00 | 0x61
273550 | 2 | 8 | 0x00 | 0x61
319983 | 2 | 9 | 0x00 | 0x61
354428 | 2 | 10 | 0x00 | 0x61
358543 | lead-out | 1 | 0x00 | 0x41
14:54:14 #11 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
14:54:14 #12 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
14:54:14 #13 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
14:54:14 #14 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 16x (2.400 KB/s)
14:54:14 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
14:54:14 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450
14:54:14 #17 Text 0 File Mmc.cpp, Line 15916
StartDAO : CD-Text - Off
14:54:14 #18 Text 0 File Mmc.cpp, Line 20531
Set BUFE: supported -> ON
14:55:15 #19 SCSI -1135 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04260000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xD5 0xCC 0x00 0x00 0x1A 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0xFF 0xFF 0xD3 0x22 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
14:55:15 #20 CDR -1135 File Writer.cpp, Line 304
Write error
14:55:15 #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
14:55:16 #22 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
14:55:16 #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
14:55:16 #24 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 16x (2.400 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17.07.2002 08:53:02
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 07.05.2004 16:01:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 03.08.2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
was stimmt da nicht?
Eulenban-Original
