General Information :
DDR1 : Empty
DDR2 (RAS 2) : 256 (Single Bank) - DIMM
DDR3 (RAS 4) : 256 (Single Bank) - DIMM
Memory Controller Information :
Memory Controller : DIMM, SDRAM
Number of connectors : 3
Max. Module Size : 1024 MB
Max. Memory Size : 3072 MB
Supported Speed : 70ns, 60ns, 50ns
Supported Voltages : 3.3v
Error Detection Method : No
Error Correction Capability : Unspecified
Current/Supported Interleave : Unspecified/Unspecified
Chipset Information :
Type : DDR-SDRAM PC3200
Frequency : 202 MHz
FSB/RAM Multiplier : 1/1x
Channels : Dual
ECC Diagnostic : Nein
RAS to CAS (tRCD) : 3 clocks
RAS Precharge (tRP) : 3 clocks
Cycle Time (tRAS) : 8 clocks
Information SPD EEPROM (DDR2) :
Manufacturer : Infineon
Part Number : 64D32300GU5B
Serial Number : 013337BC
Type : DDR-SDRAM PC3200 (200 MHz)
Size : 256 MB (1 rows, 4 banks)
Module Buffered : No
Module Registered : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 2.5v
Supported Frequencies : 133 MHz, 166 MHz, 200 MHz
CAS Latency (tCL) : 2 clocks @133 MHz, 2.5 clocks @166 MHz, 3 clocks @200 MHz
RAS to CAS (tRCD) : 2 clocks @133 MHz, 3 clocks @166 MHz, 3 clocks @200 MHz
RAS Precharge (tRP) : 2 clocks @133 MHz, 3 clocks @166 MHz, 3 clocks @200 MHz
Cycle Time (tRAS) : 6 clocks @133 MHz, 7 clocks @166 MHz, 8 clocks @200 MHz
Information SPD EEPROM (DDR3) :
Manufacturer : Infineon
Part Number : 64D32300GU5B
Serial Number : 013337C9
Type : DDR-SDRAM PC3200 (200 MHz)
Size : 256 MB (1 rows, 4 banks)
Module Buffered : No
Module Registered : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 2.5v
Supported Frequencies : 133 MHz, 166 MHz, 200 MHz
CAS Latency (tCL) : 2 clocks @133 MHz, 2.5 clocks @166 MHz, 3 clocks @200 MHz
RAS to CAS (tRCD) : 2 clocks @133 MHz, 3 clocks @166 MHz, 3 clocks @200 MHz
RAS Precharge (tRP) : 2 clocks @133 MHz, 3 clocks @166 MHz, 3 clocks @200 MHz
Cycle Time (tRAS) : 6 clocks @133 MHz, 7 clocks @166 MHz, 8 clocks @200 MHz
kann ich dort ein 512 MB modul einbauen so dass es im dualchannel läuft und die andere ram nicht runterzeiht?....wenn ja welche ram brauche ich?
thx + ciao
