"Unable to connect to server. Please check the messages window for more info."
Es wird eben keine Verbindung zum Server hergestellt und da muß es irgendein messages window geben , in dem Fehlermeldungen stehen.
Ich nutze dieses Programm eben nicht und kann auch nur in der FAQ nachlesen:
I've followed all your instructions but I still don't hear any sound
If you've done everything we've suggested above then you can check what devices the sequencer is seeing by running the Rosegarden sequencer up by itself. Try:
$ rosegardensequencer
and examine the output of the screen. The output for JACK and ALSA for an SBLive! should look something like this:
rosegardensequencer: created plugin manager
MappedAudioPluginManager::discoverPlugins - discovering plugins
Rosegarden 4-0.9 - AlsaDriver - alsa-lib version 0.9.3
AlsaDriver::jackSampleRate - sample rate changed to 44100
AlsaDriver::createJackInputPorts - adding input port 1
AlsaDriver::createJackInputPorts - adding input port 2
AlsaDriver::createJackInputPorts - getting ports
AlsaDriver::createJackInputPorts - found 2 JACK physical inputs
AlsaDriver::createJackInputPorts - connecting from "alsa_pcm:capture_1" to "rosegarden:in_1"
AlsaDriver::createJackInputPorts - connecting from "alsa_pcm:capture_2" to "rosegarden:in_2"
AlsaDriver::initialiseAudio - JACK sample rate = 44100Hz
AlsaDriver::initialiseAudio - added output port 1 (left)
AlsaDriver::initialiseAudio - added output port 2 (right)
AlsaDriver::initialiseAudio - found 2 JACK physical outputs
AlsaDriver::initialiseAudio - connecting from "rosegarden:out_1" to "alsa_pcm:playback_1"
AlsaDriver::initialiseAudio - connecting from "rosegarden:out_1" to "alsa_pcm:playback_2"
AlsaDriver::initialiseAudio - JACK playback latency 0.092879R
AlsaDriver::initialiseAudio - JACK record latency 0.046439R
AlsaDriver::initialiseAudio - initialised JACK audio subsystem
ALSA Client information:
64,0 - (Rawmidi 0 - EMU10K1 MPU-401 (UART), EMU10K1 MPU-401 (UART)) (DUPLEX) [ctype 2, ptype 2, cap 127]
65,0 - (Emu10k1 WaveTable, Emu10k1 Port 0) (WRITE ONLY) [ctype 2, ptype 2078, cap 66]
65,1 - (Emu10k1 WaveTable, Emu10k1 Port 1) (WRITE ONLY) [ctype 2, ptype 2078, cap 66]
65,2 - (Emu10k1 WaveTable, Emu10k1 Port 2) (WRITE ONLY) [ctype 2, ptype 2078, cap 66]
65,3 - (Emu10k1 WaveTable, Emu10k1 Port 3) (WRITE ONLY) [ctype 2, ptype 2078, cap 66]
Creating device 0 in Play mode for connection 65:0 Emu10k1 Port 0 (write)
Default device name for this device is MIDI soundcard synth
Creating device 1 in Play mode for connection 65:1 Emu10k1 Port 1 (write)
Default device name for this device is MIDI soundcard synth 2
Creating device 2 in Play mode for connection 65:2 Emu10k1 Port 2 (write)
Default device name for this device is MIDI soundcard synth 3
Creating device 3 in Play mode for connection 65:3 Emu10k1 Port 3 (write)
Default device name for this device is MIDI soundcard synth 4
Creating device 4 in Play mode for connection 64:0 Rawmidi 0 - EMU10K1 MPU-401 (UART) (duplex)
Default device name for this device is MIDI external device
Creating device 5 in Record mode for connection 64:0 Rawmidi 0 - EMU10K1 MPU-401 (UART) (duplex)
Default device name for this device is MIDI hardware input device
Record client set to (64, 0)
AlsaDriver::initialiseMidi - initialised MIDI subsystem
rosegardensequencer: RosegardenSequencer - started OK
Note the ALSA device list shows the external MIDI port and the wavetable on-board synth devices. If you're using a soft synth, you should see it here too. All of these will be available in the drop-down Instrument list inside Rosegarden.
You can also reach this sequencer status information by using the application itself. Go to: Settings → Configure Rosegarden → Sequencer status → Details….
Ich kann dir diese Anleitung nur übersetzen .
KarstenW
Quarksalber
