Hallo,
ich brauche mal nen Tip bei der Interpretation der dmesg-Meldungen (siehe unten)
1.Abschnitt: sieht für ich ok aus,
der Stick hat 2 Partitionen:
> die Erste: fat wird erkannt und unter /dev/TOSHIBA eingebunden
> die Zweite (U3-Laufwerk) wird ignoriert
Steuerung über udev-Regel
2.Abschnitt: fat-Partition wird manuel gemountet
fstab: /dev/TOSHIBA /media/toshiba vfat rw,nosuid,nodev,noatime,flush,uid=1001,utf8,shortname=lower 0 0
3.Abschnitt: ext3-Partition in truecrypt-container wird gemountet.
beide Partitionen werden eingebunden und ich kann damit arbeiten
ich verstehe die Fehlermeldungen nicht. soll ich sie einfach ignorieren ?
Gruß
heriL
dmesg:
------------------------------------------usb-stick stecken
Feb 8 12:46:08 dell kernel: usb 5-3: new high speed USB device using ehci_hcd and address 5
Feb 8 12:46:08 dell kernel: usb 5-3: configuration #1 chosen from 1 choice
Feb 8 12:46:08 dell kernel: scsi4 : SCSI emulation for USB Mass Storage devices
Feb 8 12:46:08 dell kernel: usb 5-3: New USB device found, idVendor=0930, idProduct=6540
Feb 8 12:46:08 dell kernel: usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 8 12:46:08 dell kernel: usb 5-3: Product: TransMemory
Feb 8 12:46:08 dell kernel: usb 5-3: Manufacturer: TOSHIBA
Feb 8 12:46:08 dell kernel: usb 5-3: SerialNumber: 0A20447032020886
Feb 8 12:46:08 dell kernel: usb-storage: device found at 5
Feb 8 12:46:08 dell kernel: usb-storage: waiting for device to settle before scanning
Feb 8 12:46:09 dell kernel: scsi 4:0:0:0: Direct-Access TOSHIBA TransMemory 6.50 PQ: 0 ANSI: 0 CCS
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] 1944287 512-byte hardware sectors: (995MB/949MiB)
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] Write Protect is off
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] 1944287 512-byte hardware sectors: (995MB/949MiB)
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] Write Protect is off
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] Assuming drive cache: write through
Feb 8 12:46:09 dell kernel: sdb: sdb1
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: [sdb] Attached SCSI removable disk
Feb 8 12:46:09 dell kernel: sd 4:0:0:0: Attached scsi generic sg2 type 0
Feb 8 12:46:09 dell kernel: scsi 4:0:0:1: CD-ROM TOSHIBA TransMemory 6.50 PQ: 0 ANSI: 0
Feb 8 12:46:09 dell kernel: sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
Feb 8 12:46:09 dell kernel: sr 4:0:0:1: Attached scsi CD-ROM sr1
Feb 8 12:46:09 dell kernel: sr 4:0:0:1: Attached scsi generic sg3 type 5
Feb 8 12:46:09 dell kernel: usb-storage: device scan complete
------------------------------------------usb-stick (vfat) mounten
Feb 8 12:46:10 dell kernel: FAT: invalid media value (0xb9)
Feb 8 12:46:10 dell kernel: VFS: Can't find a valid FAT filesystem on dev sdb.
Feb 8 12:46:10 dell kernel: FAT: invalid media value (0xb9)
Feb 8 12:46:10 dell kernel: VFS: Can't find a valid FAT filesystem on dev sdb.
------------------------------------------truecrypt-container (ext3) einbinden
Feb 8 12:46:13 dell kernel: EXT3-fs: Unrecognized mount option "uid=0" or missing value
Feb 8 12:46:13 dell kernel: kjournald starting. Commit interval 5 seconds
Feb 8 12:46:13 dell kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Feb 8 12:46:13 dell kernel: EXT3 FS on dm-1, internal journal
Feb 8 12:46:13 dell kernel: EXT3-fs: mounted filesystem with ordered data mode.
Feb 8 12:46:57 dell kernel: JBD: barrier-based sync failed on dm-1 - disabling barriers
