Linux 15.036 Themen, 107.107 Beiträge

Linux Mint 18.2 Cinnamon 64 bit bootet

andy11 / 24 Antworten / Flachansicht Nickles

ewig. Nach Aufruf von dmesg in der Konsole folgendes Teilbild:

[   33.760102] floppy0: no floppy controllers found
[   36.575258] usb 1-3: 3:1: cannot get freq at ep 0x82
[   36.580654] usbcore: registered new interface driver snd-usb-audio
[   36.580754] uvcvideo: Found UVC 1.00 device Dualpix HD720p for Notebooks (06f8:300b)
[   36.586447] uvcvideo 1-3:1.0: Entity type for entity Extension 5 was not initialized!
[   36.586450] uvcvideo 1-3:1.0: Entity type for entity Processing 4 was not initialized!
[   36.586453] uvcvideo 1-3:1.0: Entity type for entity Selector 3 was not initialized!
[   36.586455] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not initialized!
[   36.586567] input: Dualpix HD720p for Notebooks as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input16
[   36.586639] usbcore: registered new interface driver uvcvideo
[   36.586640] USB Video Class driver (1.1.1)
[  106.715629] cgroup: new mount options do not match the existing superblock, will be ignored
[  110.065920] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[  110.081334] r8169 0000:05:00.0 enp5s0: link down
[  110.081339] r8169 0000:05:00.0 enp5s0: link down
[  110.081370] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[  112.053987] r8169 0000:05:00.0 enp5s0: link up
[  112.053997] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[  126.175246] usb 1-3: 3:1: cannot get freq at ep 0x82
[  131.807274] usb 1-3: 3:1: cannot get freq at ep 0x82
[ 3188.302472] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 3533.277863] ata7: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
[ 3533.277868] ata7: irq_stat 0x00400040, connection status changed
[ 3533.277870] ata7: SError: { PHYRdyChg DevExch }
[ 3533.277875] ata7: hard resetting link
[ 3533.288110] usb 2-6: USB disconnect, device number 2
[ 3533.288113] usb 2-6.4: USB disconnect, device number 3
[ 3533.988025] ata7: SATA link down (SStatus 0 SControl 300)
[ 3539.164046] ata7: hard resetting link
[ 3539.478151] ata7: SATA link down (SStatus 0 SControl 300)
[ 3539.478157] ata7: limiting SATA link speed to 1.5 Gbps
[ 3544.540017] ata7: hard resetting link
[ 3544.854179] ata7: SATA link down (SStatus 0 SControl 310)
[ 3544.854184] ata7.00: disabled
[ 3544.854192] ata7: EH complete
[ 3544.854199] ata7.00: detaching (SCSI 6:0:0:0)
[ 3544.854571] sd 6:0:0:0: [sdd] Synchronizing SCSI cache
[ 3544.854608] sd 6:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3544.854609] sd 6:0:0:0: [sdd] Stopping disk
[ 3544.854619] sd 6:0:0:0: [sdd] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 3685.018393] perf: interrupt took too long (3129 > 3126), lowering kernel.perf_event_max_sample_rate to 63750
[ 4000.972586] perf: interrupt took too long (3915 > 3911), lowering kernel.perf_event_max_sample_rate to 51000
[ 4881.315955] perf: interrupt took too long (4897 > 4893), lowering kernel.perf_event_max_sample_rate to 40750
.......................................................................................................................

Ich hab die Stelle in der viel Zeit verstreicht mal eingedickt.

Kann jemand was damit anfangen und mir einen Rat geben

diese Zeitverschwendung zu minimieren. Gruß Andy

Ohne Wein kan?s uns auf Erden Nimmer wie dreyhundert werden Ohne Wein u. ohne Weiber Hohl der Teufel unsre Leiber. J.W.vG.
bei Antwort benachrichtigen
andy11 gelöscht_189916 „Ups - und hier weiter unten wird noch der Zugriff auf ein Laufwerk bemängelt: 3544.854608 sd 6:0:0:0: sdd Synchronize ...“
Optionen

Zum Abschluss, Zugriff auf Laufwerk in Ordnung gebracht. Nachtrag unten.

Cam abgehängt, USB Fehler ist weg. Liegt wohl an der

Doppelfunktion der Cam. Video und Ton per USB.

Festplatte gebrüft mit gsmartcontrol, ist in Ordnung.

Aber:
[   33.086224] audit: type=1400 ............................
[  105.534980] cgroup: new mount options do not match the existing superblock, will be ignored

Da wird sicher eine Partition nicht erkannt oder sowas. Vermutlich UUID.

Neuen Fehler gefunden;

[   31.661503] nvidia: loading out-of-tree module taints kernel.
[   31.661508] nvidia: module license 'NVIDIA' taints kernel.
[   31.661508] Disabling lock debugging due to kernel taint
[   31.671039] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   31.678116] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[   31.678408] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[   31.678408] NVRM: This can occur when a driver such as:
               NVRM: nouveau, rivafb, nvidiafb or rivatv
               NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[   31.678409] NVRM: Try unloading the conflicting kernel module (and/or
               NVRM: reconfigure your kernel without the conflicting
               NVRM: driver(s)), then try loading the NVIDIA kernel module
               NVRM: again.
[   31.678409] NVRM: No NVIDIA graphics adapter probed!
[   31.678656] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244
[   31.736576] intel_powerclamp: No package C-state available
[   31.762022] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[   31.762313] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[   31.762313] NVRM: This can occur when a driver such as:
               NVRM: nouveau, rivafb, nvidiafb or rivatv
               NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[   31.762314] NVRM: Try unloading the conflicting kernel module (and/or
               NVRM: reconfigure your kernel without the conflicting
               NVRM: driver(s)), then try loading the NVIDIA kernel module
               NVRM: again.
[   31.762314] NVRM: No NVIDIA graphics adapter probed!
[   31.762391] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244
[   32.340601] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[   32.340671] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[   32.340735] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   32.340791] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15

---

So, nun hab ich genug davon und bau ein neues OS auf.

Nachtrag zur Festplatte ganz oben:

Man sollte eine gebrauchte Festplatte nicht nur leeren, sondern die Partition

löschen und neu aufbauen um nicht verbliebene Fehler mit zu schleppen.

Danke für die Unterstützung, Gruß Andy

Ohne Wein kan?s uns auf Erden Nimmer wie dreyhundert werden Ohne Wein u. ohne Weiber Hohl der Teufel unsre Leiber. J.W.vG.
bei Antwort benachrichtigen