Laptops, Tablets, Convertibles 11.829 Themen, 56.657 Beiträge

toshiba festplatte wird nicht erkannt

octopu / 16 Antworten / Flachansicht Nickles

In meinem notebook toshiba satelit 410 cdt ist eine 4,3 gigabyte grosse festplatte drin die wird aber nicht erkannt.die festplatte ist in ordnung habe sie bei einen anderen notebook getestet.kann das was mit dem bios zusammenhängen den da wird sie nicht erkannt hdd (no drive).


P.s Habe die festplatte nur gegen die grossere ausgetauscht vorher war eine 2,3 gigabyte drindanach lief nix mehr

bei Antwort benachrichtigen
Alpha13 octopu „Bios update hab ich jetzt gemacht von 5,40 auf 5,60 die festplatte wird immer...“
Optionen

Hast du dich an diese Anweisung gehalten?

Bios Upgrade Installation Instructions

Please note before updating the bios of your notebook computer:
- The AC adaptor must be connected to the unit
- The machine MUST be in BOOT mode, not Resume mode.
- Any power on passwords must be disabled.
- All PCMCIA cards must be removed from the system prior to upgrading the BIOS.
- The notebook computer must not be attached to any type of docking device.


Please follow the instructions below to update the bios:

1. Extract the bios file onto a diskette
2. Place the diskette in the floppy disk drive
3. While holding down the F12 key on the notebook itself, power up the notebook computer.
4. Follow the instructions that appear on your screen.

Besonders daran!

It is not unusual to see a CMOS error when you first reboot the computer after
installing the new BIOS.

If you see this message on your screen, press F1 as
instructed. This displays the "TSETUP" screen. Press

bei Antwort benachrichtigen
hab es fast aufgegeben octopu
hab es fast aufgegeben Alpha13
defaults??? octopu
defaults??? Alpha13
defaults octopu